DMT Presenter Control Bedienungsanleitung PDF herunterladen (Seite 36)

Culture Myograph System Model 202CM

5. Once the dimensions and units of the calibrated rectangle are correctly

entered, click the ”calibrate” button on the dialog box. The VediView

™

image

analysis is now calibrated. All parameters passed to other control bars or

logged will be calibrated.

6. To save the calibration settings for future experiments, a calibration le

(*.cal) can be saved and subsequently loaded from the Calibration dialog

box. The le name being used for calibration is displayed in the dialog box; to

remind the user of the current settings. The user may also change the scaling

applied to the current calibration parameters from the calibration dialog box

or by using the "adjust calibration" icon on the tool bar. This facility can

be useful if VediView

™

is used with a video-microscope system in which the

magnication settings are changed. If for example VediView

™

is calibration

using an x20 microscope objective and subsequently an x50 device replaces

the objective, then the calibration can be adjusted by a suitable factor (in this

case 2.5). Given the optical factors affecting such a change, it is always worth

checking the calibration for obtaining the most accurate results.

3.5 Customising the Interface

The functionality of VediView



is based on a series of control bars that is congurable

in different ways. The interface can be changed to suit a particular experiment or

user. Once the Interface has been designed it may be saved for any future use. The

default interface setup (setup 0) is initially set to the factory default values. Although

set-ups can be redened, the factory defaults can never be changed. A custom

interface can be designed and implemented by following the procedure:

1. Launch VediView

™

and select the user setup from the View menu. If this is the

rst time you are using VediView

™

then the interface set-up will be equal to

the factory setting. Note that you can always return to the factory settings by

selecting factory setting from the options in the user setup.

2. Design of a custom

Figure 3.27 VediView™ Main

window with factory settings

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

DMT Presenter Control Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren DMT Presenter Control