DMT Presenter Control Betriebsanweisung PDF herunterladen (Seite 70)

S1 User Handbook

SERIAL COMMUNICATION PROTOCOL

Command Description Response

DIM:a Congure whether a channel with control ACK:

room mute selected should dim or mute

monitors when it has PFL selected

A = DIM / MUTE

1 = Dim Monitors on PFL

0 = Mute Monitors on PFL

N.B Monitors will always mute when a channel with mute enabled

goes live (ON & Fader Up) ACK:

DIM:? Read DIM / MUTE on PFL Status DIM:a,b

B = Mute Status

0 = Not Muting

1 = Muting

DIS:? Read Digital Input Status DIS:a,b,c,d

A = Channel 9 SPDIF / Optical Selection

1 = SPDIF

0 = Optical

B = Channel 9 Sync

0 = No Sync

1 = Sync

A = Channel 10 SPDIF / Optical Selection

1 = SPDIF

0 = Optical

B = Channel 10 Sync

0 = No Sync

1 = Sync

DST: Upload Sub Processor Firmware

DWN: Upload Processor Firmware

EEP:a,b Save Conguration ACK:

A = Enable write

1 = any cong updates will be written to eeprom

0 = cong updates will not be written to eeprom

B = Enable Auto Save Settings

1 = Auto save desk state enabled

0 = Disabled

EEP:? Read EEPROM Status EEP:a,b,c

C = EEPROM Auto Save Error

GPI:a,b Congure GPIO

A = GPIO Pin Number ( 1 – 5)

B = Data ACK:

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 79 80

Keine Kommentare

DMT Presenter Control Betriebsanweisung Seite 70