DMT Presenter Control Betriebsanweisung PDF herunterladen (Seite 51)

S1 User Handbook

ADVANCED CONFIGURATIONS

Stop Function:

This sets whether the Stop function is continuous (remains active) or momentary (active for

a approximately half a second). Please note, microphone inputs on channels 1-5 have no

stop function.

Tally Back

Telco Tally: Enable/ disable the Telco Tally Back input. If enabled, a GPI must be congured to

perform this task and the Remote Mode must be set to a Telco Mode

Automation Tally: Enable/ disable the Automation Tally Back input. If enabled a GPI must be

congured to perform this task.

ON Button Mode

This allows you to select how the ON button aects the remote signal

• ON/OFF:theremotestartswhenthebuttonisturnedonandstopswhenthebuttonis

turned o

• ON/REPEAT/OFF:asperON/OFFwithanadditionalstartsignalbeingtriggeredwhen

the ON button is pressed again without being turned o i.e. when the channel is

routed.

Timers

This allows you to congure which inputs will trigger a timer signal when the channel

becomes routed. This is used with an external timer device such as the Sonifex S2-MT

Meterbridge Timer Panel.

GPIO Conguration

The GPIO screen allows the conguration of up to 10 functions for each GPI/GPO and also

options for the functions. Lists of common functions and options are provided by Sonifex

within SCi. For bespoke functions and options please contact Sonifex.

Fig 4-5: GPIO Conguration

Screen

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 79 80

Keine Kommentare

DMT Presenter Control Betriebsanweisung Seite 51