DMT Presenter Control Betriebsanweisung PDF herunterladen (Seite 45)

S1 User Handbook

ADVANCED CONFIGURATIONS

• StartfromCUE/PFL&ON

- Aswell as the start signals being generated when the channel is live, a start

pulse can be congured to be sent when the CUE/PFL button is pressed. This

option would allow the automatic start of a cd player for example, when the

presenter prefades that particular channel.

• TelcoModewithCUE/PFL

- This operates the same as the telco mode except the CUE/PFL button can also

generate start and stop remote signals

Momentary/Continuous

Each remote output can be congured to operate in momentary or continuous modes.

Repeated Starts Mode

It is possible to congure the ON button to operate in a Repeated Start Mode. If this option

is enabled, a start pulse will be sent when the channel initially goes live. If whilst the

channel is live (ON button is green), the ON button is pressed again, an additional start pulse

will be sent.

User Guide – Section 4-2 General purpose inputs and outputs

The S1 has ve General Purpose Inputs/Outputs (GPIO) available. Each GPIO has been

designed to be very versatile & almost any operation with the mixer can be achieved when

utilising them.

General Purpose Inputs

Each GPI can be congured to perform up to 10 dierent operations from a single input. For

example, in a remote play out situation, you may want to:

* Force 4 channels ON with the faders forced up

* Force 4 channels to input 1

* Mute the Control Room Monitors

This conguration would utilise 9 of the 10 operations available for an individual GPI.

Options / Conguration

The Input can be congured to operate in several dierent ways:

* Momentary / Continuous GPI

* Active High / Low GPI

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 79 80

Keine Kommentare

DMT Presenter Control Betriebsanweisung Seite 45